Practical advice on internal packages from Rotar Interior Ltd: how the work is sequenced, what drives the price and what good looks like on a finished job. Written for the people who specify and run the build.
Tape and jointing is the finishing stage that turns a wall of plasterboard into a smooth, paint-ready surface without a skim coat.
Putting up a new internal wall sounds simple until you find there are six different kinds of plasterboard on the shelf, in three thicknesses, and nobody in the shop can tell you which one you need.
Most people asking this question have a ceiling that is cracked, sagging or hiding a mess of pipes and cables above it.
Suspended ceilings turn up in almost every office refurbishment quote, and plenty of people accept them without ever asking why.
Here is the surprise most people find when they search this: a plasterboard partition wall and a stud wall are usually the same thing.
If you have been quoted wildly different prices for drylining, you are not imagining it.
If you are pricing up a renovation or a new stud wall, the figure you will hear most often is a rate per square metre.
SFS (Steel Framing System) gets specified on a lot of commercial jobs around Essex, but not every fit out actually needs it.
If you are pricing up drylining for a single room, most UK homeowners end up paying somewhere between £600 and £1,800 depending on size, method and finish.
If your builder has mentioned an MF ceiling or a timber framed ceiling and you are not sure which suits your room, you are in good company.
Send the drawings over and we'll come back inside five working days with a fixed price and a programme fit.
Drawings welcome. Anything missing, we'll come back with a question, not a guess.
Your enquiry has been sent. We'll come back to you within one working day.